|  Wire Insulating Lines
Since 1965, when the first Jennings hydraulically powered PFTE Wire Insulating Line was
put into service, Jennings has led the world in the production of Wire Insulating
Extrusion Lines.
Our initial Hydraulic Machine processed 36" long preforms. They were similar to the
mechanical machines in service at the time, with the difference that the Jennings unit was
designed to permit operation at higher reduction ratios. This was the result of our unique
higher thrust capabilities, along with a far more efficient drive mechanism. After our
first hydraulic Wire Insulating Extruder was introduced, Jennings continued to lead the
market by increasing the ram stroke from 48" to 72". Our continuing improvements
have finally yielded the 108" Stroke Extruder, which is now the industry standard.
When combining reduction ratios of 3000:1 and 108" of stroke, our machines can
achieve continuous yields exceeding 25,000ft per machine load. With the addition of a
Jennings Pay-Off, Vaporizing Console, Sintering Ovens and Take-Up, you will be able to
compete successfully against anyone in the world while extruding at speeds of up to 350ft
per min.
Standard Equipment on our Wire Insulating
Line:
Additional Equipment:
- Preform Press
- Mixing Tumbler
- Additional Interchangeable Kits
Optional Equipment:
- Take-up to handle larger spools
- Pay-off to handle larger spools
- Horizontal Extruder 75-ton 108" Stroke
Home | Horizontal Extruders | Vertical Extruders | Touch Screen | Vaporizing Consoles | Machine Re-Manufacturing | Replacement Parts | Contact Jennings
|
